C.S. Armory Fayetteville, Type III Rifle & Linen Sling

Fayetteville Armory Rifles are some of the most sought after Confederate weapons made. Most Southern weapons made during the war didn’t have much quality control, with most showing obvious flaws in the stock, barrel and hardware. Most collectors including myself find the flaws unique to the weapon and love the story behind the flaws, however the Fayetteville Rifles were above the the quality standard for all Confederate weapons.

Union weapons went through a vigorous inspection process, if the viewing officer found flaws in the quality of the weapon he would reject it sending it back to the maker. The maker then would not get paid for the weapon potentially losing future contracts.

In the South it was a very different story, most armories and manufactures of weapons didn’t have much of a quality system. At the Richmond Armory, the Souths largest weapons factory there was a viewing process but most of the weapons that were viewed and proofed would not pass Northern standards.

However it was a much different story at the Fayetteville Armory. Phillip Burkhart, the former Harper’s Ferry mechanic and John Hall protégé served as master armourer for the Fayetteville Armory. He along with many of the mechanics, craftsman and laborers that worked at the Harper’s Ferry Armory were responsible for making the different versions of Fayetteville Rifles throughout the war.

Some of the equipment that was confiscated by Stonewall Jackson at Harper’s Ferry in May of 1861 was sent by rails to Richmond Virginia the rest was sent to the Fayetteville Armory in North Carolina along with many of the expert mechanics. This would give the Fayetteville Armory the quality equipment and expert craftsman they needed to make such a quality weapon that would even pass the strict quality inspections in the North.

The newest addition to the Civil War Arsenal is an 1863 Fayetteville Rifle Type III. Except for the S style hammer the rifle is a close copy to the U.S. Model 1861 rifle-musket. Clean straight lines and brass hardware make the Fayetteville a hard weapon not to like. The type III is different from the type II with its 1863 dated Lock Plate made entirely at Fayetteville. The Type II Lock Plates were made at the Richmond Armory and were very similar to the Richmond Lock Plates with the low profile hump, only difference is the markings on the plate.

Similar to the U.S. Model 1855 rifle the Fayetteville was designed with a stud on the right side of the muzzle for affixing a saber bayonet. Thousands of these fish scale bayonets were fabricated at the armory in 1862-1863. The saber bayonet was replaced with a socket bayonet by late 1863 on the Type IV Fayetteville’s for the remaining portion of the war.

I am looking for a fish scale Saber Bayonet, if anyone knows of one please please contact me at civilwararsenal@yahoo.com attn: Gene West. Thanks for stopping by, and if you have any questions about this rifle or any of the other weapons in my Arsenal feel free to ask…..oh and I’m always on the hunt for new weapons to add to my collection, especially Confederate. If you have any and are interested in selling them give me a shout maybe we can make a deal.

1863 Confederate States, Richmond Carbine & Linen Sling

If you’ve been following the Civil War Arsenal for enough time you know I have a soft spot in my heart for Richmond made weapons. I’m always on the lookout for affordable quality Carbines, Short Rifles and Rifle Muskets.

So recently Rick Burton of http://www.ccrelics.com made available a very good condition 1863 Richmond Carbine with a linen sling. I contacted him and we negotiated a fair price that we both could live with. I received the Carbine shortly after and “WOW” I was extremely impressed with the condition of the weapon.

It was the first CW weapon I’d purchased from Rick and was impressed with the overall experience. His website was user friendly and he had a large selection of neat Confederate pieces (and Union)…..and he’s got some nice edged weapons….if only I was rich…haha

So anyway back to my new 1863 Richmond Carbine, she’s a beauty the stock, barrel, lockplate and all hardware are correct and in very good condition…..heck it’s even got the original rear sling swivel screwed into the stock…..for anyone who doesn’t know the rear sling swivel is generally missing from most Richmond Carbines. And the icing on the cake is that it came with a Confederate Linen Sling, I will admit the sling is not perfect however neither am I…..lol

The butt plate is steel and marked U.S., the rear sight is original and the front sight hasn’t been filed down, the barrel band closest to the breech is Richmond made due to the U being offset, the brass nose cap has a nice patina and the lock plate has very good markings as well as good action. The stock is in great condition with some initials and the year 1865 lightly carved on the right side.

This brings my collection of Richmond’s to 9……6 Carbines, 1 Short Rifle and 2 Long Rifles……not bad if I do say so myself.

If you have any questions about this weapon or any of the other weapons in my Arsenal feel free to contact me at civilwararsenal@yahoo.com attn: Gene West

S.C. Robinson (Sharps) Carbine

Samuel C. Robinson was a prominent businessman and property owner in Richmond, Virginia at the outbreak of the “war of Northern aggression”. He teamed up with John H. Lester who had migrated to Richmond shortly before the out break of the war. John was a accomplished businessman who moved his wood working machinery from Brooklyn, New York to Richmond, Virginia.

December of 1862 the Confederate Government entered into contract with the S.C. Robinson Arms Company, of which John Lester was superintendent. The contract was for as many Sharps pattern carbines the firm could produce. During the following 15 months (December 62 – March 63) S.C. Robinson’s Arms Co. manufactured around 2000 “Robinson Sharps” carbines.

The factory was taken over by the Confederate Government sometime after March of 1863. and as the war pressed on and the need for Calvary weapons increased the fabrication of weapons was rushed and many of the Robinson Sharps gained a bad reputation among the troops. One report contending that seven out of nine carbines had burst while testing. Investigation determined that improper handling of the arms would cause loose powder to leak into the lever spring mortise in the forestock, resulting in ignition and bursting of the forestock when firing. The problem was eventually solved by milling a half crescent shaped cutout in the bottom of the forestock allowing any residual powder to fall free.

While the S.C. Robinsons Arms Manufactory was in private hands there was approximately 1900 carbines manufactured and approximately 3500 made while under Confederate Government control.

S.C. Robinson Carbines are one of the few Confederate weapons with serial numbers on them, which allows us to understand when a particular carbine was manufactured, giving us better insight into there history. Most Confederate weapons aren’t so kind to the collector and enthusiasts leaving us grasping at straws to there history. In John M. Murphy’s book “Confederate Carbines and Musketoons”, John claims based on his research the lowest serialized S.C. Robinson carbine known to exist is “11” and the highest is “1909” and the lowest serialized Confederate produced carbine is “1925” and the highest is “5463”.

Robinson Carbines measure a total of 38 ½” with barrels that are 21 ½” long. They are .52 caliber and are rifled with six lands. Most barrels were browned, however some were heated blue. The lock plates/ actions were color-case hardened. The earlier versions made by S.C. Robinson are marked on the lock plate behind the hammer “S.C. Robinson / Arms Manufactory / Richmond VA/ 1862” in four lines, the serial number was stamped on the tail of the lock plate. The Government produced carbines are virtually identical to those made by S.C. Robinson except there lock plates are unmarked except for the serial number and the barrels are marked with Richmond VA behind the rear sight.

All this leads me to one of my many new Confederate Weapons. This carbine has been on my wish list for years, it is a carbine manufactured while under Government control with serial number “4469” on the tail of the lock plate, the tang at the rear of the breech block as well as the backside of the sling plate which can’t be seen while attached to the stock. All in all the carbine is in great shape for its age and history. The action is a little sloppy, but that’s to be expected, the stock does have a small crack on the left side above the trigger, beneath the sling ring…..but it’s minimal. Seems as though the horseman who carried this carbine carved his name and company into the left side of the stock (refer to the photos) which makes this weapons that much cooler…..

So there you have it another Greeeeeaaaaat Confederate weapon, I’m currently looking for an early version of the S.C. Robinson Carbine manufactured while privately owned, which should put the serial number below 1900. If you happen to have an early version Robinson Sharps that you’d like to sell give me a shout maybe we can strike a deal. If you have any questions about this or any of the other weapons at the” Civil War Arsenal” contact me at civilwararsenal@yahoo.com attn: Gene West. Thanks for stopping by, hope to see ya again.

1863 Richmond Carbine

The newest weapon in the ever growing Civil War Arsenal is an 1863 Richmond Carbine that is in excellent condition with all of its accoutrements still in tact. This is not the only Richmond Carbine I own nor is it the only 63 Carbine in my Arsenal, however it is my first complete Richmond Carbine with everything in place…I.E. pinched sight, ram rod, rear sight, swivel slings,etc…..another neat feature of this Southern weapon is that it’s 100% Southern made.

Most Richmond Armory made weapons were assembled with at least some parts from battlefield pickups and or parts that were confiscated during the 1861 raid of the Harper’s Ferry Armory.

As we inspect the cavity under the lock plate we can clearly see that there is no primer cut finger feeds that would be in place if the stock was manufactured at the Harper’s Ferry Armory. The C.S. Armory, Richmond would eliminate unnecessary machining operations from the stock leaving lock plates cavity central element in the shape of a “mules foot”.

The date on the Richmond lock plate has a “die break in the lower left portion of the 8” which is thought to be a stress flaw in the stamping process during the month of October 1863. During that month the Richmond Armory assembled 300 Carbines.

I love the look of the dark “blackened” wood and hardware especially with the brass butt plate and nose cap. Unlike most Confederate weapons you’ll see these days with missing and damaged parts, probably because most of the better quality weapons are in museums and private collections, this carbine is complete in every way.

This makes 7 Richmond Carbines I currently own. I can’t say any one is my favorite, since there all my favorites for different reasons. But I do tend to favor the newest members of my collection until I purchase the next one, lol….

Hope you enjoy the photos and if you have any questions about this Richmond or any of the other weapons in the Civil War Arsenal please contact me at civilwararsenal@yahoo.com attn: Gene West

Joslyn Carbine, Model 1864

The Northern Industrial machine was ramping up in 1862. With one loss after another the Union Army was in need of not just better foot soldiers but better weapons to arm them. Procurements were being made with dozens of Northern businessmen to make as many carbines and rifles regardless of the weapons performance. Much of this changed as the war went on but in the early days of the war it was a Mecca of opportunity for anyone who had the know how and ability to make guns.

The inventor of the Joslyn was Benjamin F. Joslyn of Worcester, Massachusetts but in late 1859 William C. Freeman acquired the rights to the weapon and with the help of Senator J.L. Williams received his first Government contract. The early Joslyn carbines were percussion rifles but by October 1861 Benjamin received a patent for a rim fire design that he would implement with the Joslyn 1862 Model.

As the war raced on and there being a urgent need for as many Calvary weapons as the Union Army could purchase, Benjamin received many contracts from the U.S. Government, Ordinance Department, but he could never fill the orders as quickly as promised but it didn’t stop the Government from making contractual commitments with him.

Finally in November 1863, Benjamin after many alterations and patent changes to the Joslyn carbine received his biggest contract from the U.S. Ordnance Department. He was to furnish 15,000 Carbines at a price of $23.50 each. The order stated that the first 1000 would be delivered within 60 days and then 3000 a month until the contract was filled, however patent changes to the breech block delayed this fulfillment. Not until July of 1864 were the first carbines delivered.

The Joslyn Carbine, Model 1864 was a flawed weapon by most officers standards. It had gone through a bunch of improvements since the start of the war but still didn’t meet most evaluators expectations. Nine Officers reported test firing the Joslyn during the 1863-64 Ordnance Department survey. Only one considered it good while the others considered it either poor or worthless. The complaints on the carbine were the breechblock had a tendency to blow open while firing the weapon and there was a problem chambering the Spencer Ammunition. It seems as though the ammunition problem was faulty ammo and improper chamber tolerances for some of the Spencer ammunition.

During the coarse of the war a total of 11,261 Joslyn carbines were purchased by the U.S. Ordinance Department as well as 515,416 cartridges at a cost of $12,935. As the war came to a close there wasn’t much need for carbines, especially carbines that weren’t very good so the Joslyn Firearms Company closed its doors in 1866 and disposed of its equipment at a Sheriffs sale in June 1868.

Calvary regiments which were issued Joslyn carbines were: 4th and 8th Indiana, 1st New York Dragoons, 19th New York, 13th Tennessee, 9th Pennsylvania, 3rd West Virginia, 1st Wisconsin, 1st Nebraska, 1st Nevada and the 11th Ohio.

So that brings me to the next example in the Civil War Arsenal. This 1864 Model Joslyn has a Serial # 6620 and is in relatively good condition. With a crisp trigger mechanism and a clean stock this Josyln probably never saw much service. It has two cartouches on the left side of the stock suggesting that it was issued and likely stored in an armory after the war.

I’d like to thank John D. McAulay for his historical research and devotion. His book “Carbines of the Civil War” is a must for anyone collecting Union Carbines. This book is an easy read and great reference for Civil War weapons collectors, if you don’t own it, buy it now.

If you have any questions about this carbine or any of the other weapons in the Civil War Arsenal feel free to contact me at civilwararsenal@yahoo.com attn: Eugene West

Civil War Guns

Sitting around the house today not knowing what to do, outside the snow is coming down and there calling this the storm of the century with up to 2 feet of snow and 50 MPH winds expected, sounds cold to me….

Anyway I decided to take some photos of my history room, a.k.a. the “Civil War Arsenal”. As you can see many of my antique weapons are displayed throughout the room. I recently had a carpenter build the racks that the rifles are mounted on, all in all I think the racks came out pretty nice and compliment the rifles and corresponding bayonets.

You’ll also notice some D-Handle, Side Knives, Pikes and Artillery Swords displayed as well. Its my opinion that these weapons should be displayed so friends and family can see and handle them. I don’t quite get the fun in collecting antique guns and swords then putting them in the safe or some out of the way place where no one can appreciate them. But thats just my opinion and you know what they say about opinions.

Also scattered throughout the room are a number of paintings, historical photos, bronze castings and dozens of other historical items. You’ll notice that I am a big “John Paul Strain” fan he is perhaps one of the best artist in his field I have a bunch of his paintings. I also have some of “Karl Anderson’s” sculptures, he’s a less know artist then John however just as good and I believe the best in his field, especially when it comes to historical accuracy.

Well there you have it, another story that no one will read. Just Kidding…. If you have any questions about this post or any of the weapons in the “Civil War Arsenal” feel free to contact me at civilwararsenal@yahoo.com attn: Gene West

1863 Dickson, Nelson & Co. Rifle

With the outbreak of the war in 1861, William Dickson (a planter from Alabama), Owen Nelson (an attorney from Tuscumbia) and Lewis Sadler (a physician) started the Shakanoosa Arms Company. Operations began at there first plant in Buzzard Roost, Colbert County, Alabama. A $7000.00 advance for funding to manufacture U.S. Model 1841 “Mississippi” type rifles for the state of Alabama was received.

In the summer of 1862 the Shakanoosa Arms Company was forced to move its operation to Rome Georgia in fear of the nearing Union forces, after a while at this location the armory again suffered a setback when there building was destroyed by fire. Again they were forced to move to Adairsville, Georgia under the name Dickson, Nelson & Company and in August 1863, Union advances forced them have to move further south to Macon, Georgia. Finally in February of 1864 the company moved to its final home in Dawson, Georgia.

Rifles under the supervision of inspecting officer, Captain B.J. McCormick were to conform to the U.S. Model 1841 Mississippi pattern, having 33” barrels of .58 caliber and stocks 48” in length. Brass hardware on these rifles included a straight butt plate, two piece trigger guard, barrel bands and nose cap with many of these parts having casting flaws throughout and some having reddish color indicating high copper content.

It’s estimated that about 3600 rifles were manufactured from 1862 thru 1865, but there’s no documentation to prove that. It’s the authors opinion that this number is way to high for the number of surviving rifles. Most of the surviving specimens are dated 1864 and 1865.

“Flaydermans Guide to Antique American Firearms” states that there are only 3 recorded 1863 dated lockplates. Two of these lockplates are not attached and the other is on a two-band rifle.

Which brings me to the newest member in the “Civil War Arsenals” ever growing collection. This 1863 Dickson, Nelson Rifle is truly a rare Southern Beauty. Based on Flaydermans Guide, this new addition is the rarest example of any weapon the Arsenal has to offer, making it the forth known 63 lockplate and only the second one attached to a stock.

I first saw this rifle a couple years ago at a gun show in Gettysburg, the fellow that was selling it had a large collection of Southern Weapons. I purchased another from him at the time (63 Fayetteville) that is one of the nicest examples in my collection. I had made him an offer on this rifle but he wasn’t willing to negotiate off his price. Fast forward two years and I ran into him at another Civil War Show and it turned out he still had the rifle. So after a little bit of haggling we settled on a price and I became the new owner of this 1863 Dickson, Nelson Rifle.

This rifle is in very good condition considering its history. The lock plate is dated 1863 ALA. behind the hammer which means the rifle was manufactured through contract for the state of Alabama. Forward the hammer is stamped DICKSON, NELSON & CO. and C.S. on the bottom line. The upper left surface of the barrel is date stamped ALA. 1863/65 (can’t really tell due to pitting)and the under surface of the barrel is stamped with a “windmill” or “Maltese Cross”armorers mark, attributed to Nathaniel D. Cross an inspector at the Selma Arsenal. The rear sight is fixed and located 3 1/8” forward the barrels breech. All of the brass hardware has casting flaws and lots of great patina. The barrel shows three broad lands and grooves and the ram rod appears to be original with some pitting but still showing its thread. The stock is in extremely good condition with the exception of what appears to be bug/termite damage on the left side by the butt plate, but it’s my opinion that this damage was original to the weapon when manufactured and not after the war while in storage, but it’s only my opinion. Included with the purchase of this weapon was an original confederate linen sling which compliments the rifle well based on its condition. I’m not certain it’s original to the rifle but based on the sling folds it’s been on the rifle for a long time.

So there you have it, yet another addition to the Civil War Arsenal. I hope you enjoy the photos, if you have any questions or thoughts on this rifle feel free to contact me at civilwararsenal@yahoo.com attn: Eugene West, hope to hear from you soon

1865 Spencer Repeating Carbine

The Civil War Arsenal has been focusing mostly on Confederate Weapons, the author has been crazed by these Southern beauties. But the Arsenal is full of other war time weapons that have been praised by the men of their time. The one we’ll showcase in this article is the 1865 Spencer Carbine.

The Spencer is considered the first successful repeating carbine to fire a metallic cartridge. Men from both the North and South agreed that the Spencer had a hand in turning the tides of the War in favor of the North. The inventor of the weapon was Christopher Miner Spencer. Born in Manchester Connecticut at the age of 19 was issued U.S Patent # 27,393 for a tubular magazine cartridge firearm in both carbine and rifle design.

In July of 1861 the U.S Government (Navy) placed there first order for 700 Spencer rifles with sword bayonets and 70,000 metallic cartridges, which were issued to Mississippi flotilla gunboats. At the battle of Gettysburg a portion of General Custer’s Michigan Brigade were armed with Spencer rifles which they used against Jeb Stuart’s Calvary with tremendous success.

Two versions of the Spencer were manufactured by both the Burnside Rifle Company (30,496) and the Boston Rifle Factory that was owned and operated by Christopher Spencer (64,685) for a total of 95,181 weapons and 58,238,924 cartridges. The 56-52 and 56-50 rim fire metallic cartridges were used in the Spencer Carbines. The 56 stands for the Spencer cartridge and the 52/50 stand for the bore diameter. The Burnside shot 50 caliber while the Spencer shot 52 caliber.

The Spencer carbine manufactured in Boston Mass. has an overall length of 39 inches and weights 8 pounds 4 ounces, case hardened lock, two piece black walnut stock with the butt stock being 15 inches. The barrels are blued and 22 inches long (however this M-1865 Spencer has a 20″ barrel) a brass blade front sight and a single leaf rear V notched rear sight graduated to 800 yards.

A tubular magazine located in the butt stock to feed the rim fire cartridge, capable of holding 7 copper cartridges were pushed forward to the receiver by a coil spring. To fire the Spencer carbine the operating lever is lowered ejecting the previously fired cartridge bringing the next cartridge into position, the hammer is then cocked and the carbine is ready for firing. Seven cartridges could be fired in about 10 seconds.

In the latter part of the war Edward M. Stabler of Maryland invented the Stabler Cut-Off Device. It prevented the cartridge from feeding the magazine to the receiver by limiting the lowering of the breech block. The carbine could then be used as a single shot weapon. A few of the carbines manufactured by the Spencer factory, plus 19,000 of the 30,496 of the Burnside Spencers were equipped with the Stabler Cut-Off Device.

The Blakeslee cartridge box received U.S. Patent # 45,469 on December 20, 1864, invented by Colonel Eratus Blakeslee of the 1st Connecticut Voluntary Calvary. The cartridge box was capable of carrying 10 to 13 tinned tubes containing seven Spencer cartridges each, giving Union Calvary men an additional 70 to 91 cartridges at there finger tips.

At the 1865-66 carbine test trials, the Spencer was rated the best arm of its kind offered for use. The Spencer carbine was carried by Custer’s 7th Calvary at the Battle of Little Bighorn and was used until it was replaced by adoption of the 45-70 trapdoor Springfield in 1873.

After the war demand for the Spencer declined and the Company went out of business in September 12, 1869. Its assets were purchased at auction by the Winchester Repeating Arms Company in 1870.

Which brings us to this fine example of an 1865 Spencer Repeating Carbine which has the Stabler Cut-Off Device. The stock is in excellent condition, the receiver still has signs of bluing and the barrel and all hardware having a nice brown patina. I don’t normally shot any of my antique weapons but I purchased preloaded cartridges from Dixie Gun Works and had a blast shooting this weapon at targets of 25 yards, the weapon shot flawlessly hitting the target most of the times. Ironically I am not a good shot but the Spencer Carbine made me a Marksmen.

I must offer credit and thanks to author John D. McAulay for his book Carbines of the Civil War 1861-1865 for many of the facts written in this article are a result of his hard work and research.

1864 C.S. Richmond Carbine

Finally a 1864 Richmond that was affordable enough to add to the ever growing Civil War Arsenal. This fine Richmond Armory weapon is 100% Southern manufactured. The stock has no cut out for the Maynard Primer system on the mule’s foot, suggesting that it is wood that was shipped up from Macon Georgia and shaped in Richmond Virginia.

The lock plate has a nice brown patina with fine markings that we like to see on these models. The barrel also has a brown patina with clear V.P. and eagle inspection markings however their is no date stamped. The rear sight is missing however it does have the cut for the steady pin which holds the sight straight. The only problem with the barrel is the front sight has been filed down, however based on the color it was done a very long time ago.

The barrel bands are both stamped with the off set U (for up) which tells us they were hand stamped at the Richmond Armory, however the front barrel band is missing its sling and unlike most Richmond Carbines that are missing the rear sling that screws into the stock this one has its correct one. The butt plate and the nose cap are both brass which is common amongst 1864 Richmonds.

If you haven’t noticed by now I should tell you I love these Richmond Armory weapons. I can’t seem to get enough of them. Each and every one tells its own story, I guess that’s what fascinates me about them.

I’m hoping to add more late model Richmonds to my collection over the next year. It’s my opinion that the late 1863 and 1864 models with there brass butt plates and Macon Ga. stocks tell great stories and show case well. So with any luck you will see my collection grow with those models and if I get really lucky I just may have the opportunity to add more short rifles to my collection. I think there my favorite, but like everything else that changes with time.

Thanks for stopping by and reading my garble. I hope you enjoy the photo’s and if you have a Richmond no matter what year or condition and want to sell it, shoot me an email at civilwararsenal@yahoo.com attn Eugene West

1863 Richmond Va. Carbine & Linen Sling

Summers almost over which is a bummer but I’ve been busy buying lots of new Southern Weapons for my arsenal. I haven’t been written much lately since I’ve been so busy at work. It’s a necessary evil (work that is) if I want to continue collecting and growing my weapons collection.

Just some of my new pieces include 1863 Richmond long rifle that I purchased from William Adams at the Gettysburg Civil War show back in June, E.P. Bond Enfield with the JS & anchor cartouche and hand engraved inventory # 8199 on the butt plate and 1864 Richmond Virginia Carbine out of a collection from Georgia.

But the Weapon I’ll write about today is the 1863 Richmond Carbine, I purchased this weapon from the good people at Lodgewood Mfg. I believe the carbine was on consignment and while surfing their web site I stumbled upon it, immediately I called David and negotiated a price.

The carbine is in pretty good shape especially for the price I paid. The only replacement parts is the front barrel band and the ram rod, but you can tell the ram rod has been with the weapon for a very long time and is hand made with many forging flaws throughout, oh and its missing the rear sight which is not uncommon for Richmond carbines everything else on the weapon is correct.

The wood stock is complete and has a great aged/blackened color to it, the brass tip towards the muzzle is correct with the extra thickness on the bottom to hold the ram rod. The stock has the Maynard Primer cut out under the lock plate so we know this was made with one of the condemned rifle stocks confiscated when the Harpers Ferry Arsenal was raided back in April 1861.

All the metal on the carbine except for the lock plate has a sweetened chocolate color to it, I’m thinking that this was probably a wall hanger at one time and someone polished the lock plate to make it look pretty (bummer) but at least they didn’t polish the whole carbine. The front pinched sight has been filed down a bit and the butt plate is metal with no U.S. stamp on it.

This weapon has the rear sling swivel that screws into the stock behind the trigger guard generally lost on these carbines. A month or two after I purchased this carbine, Brian Akins from “Rebel Relics” had a confederate linen sling for sale on his web site, so here I go again I call Brian a negotiate a price for the sling.

I wasn’t certain which weapon I would place my new sling on but it seemed as though it was meant for this 1863 Richmond carbine.

So there you have it another story told and another weapon for the Civil War Arsenal. My collection of Richmond rifles is growing quickly, if you have a Richmond rifle, short rifle or carbine that you’d like to sell please contact me at civilwararsenal@yahoo.com Attn: Gene West

Thanks for stopping by and enjoy the photos.