1864 C.S. Richmond Carbine

Finally a 1864 Richmond that was affordable enough to add to the ever growing Civil War Arsenal. This fine Richmond Armory weapon is 100% Southern manufactured. The stock has no cut out for the Maynard Primer system on the mule’s foot, suggesting that it is wood that was shipped up from Macon Georgia and shaped in Richmond Virginia.

The lock plate has a nice brown patina with fine markings that we like to see on these models. The barrel also has a brown patina with clear V.P. and eagle inspection markings however their is no date stamped. The rear sight is missing however it does have the cut for the steady pin which holds the sight straight. The only problem with the barrel is the front sight has been filed down, however based on the color it was done a very long time ago.

The barrel bands are both stamped with the off set U (for up) which tells us they were hand stamped at the Richmond Armory, however the front barrel band is missing its sling and unlike most Richmond Carbines that are missing the rear sling that screws into the stock this one has its correct one. The butt plate and the nose cap are both brass which is common amongst 1864 Richmonds.

If you haven’t noticed by now I should tell you I love these Richmond Armory weapons. I can’t seem to get enough of them. Each and every one tells its own story, I guess that’s what fascinates me about them.

I’m hoping to add more late model Richmonds to my collection over the next year. It’s my opinion that the late 1863 and 1864 models with there brass butt plates and Macon Ga. stocks tell great stories and show case well. So with any luck you will see my collection grow with those models and if I get really lucky I just may have the opportunity to add more short rifles to my collection. I think there my favorite, but like everything else that changes with time.

Thanks for stopping by and reading my garble. I hope you enjoy the photo’s and if you have a Richmond no matter what year or condition and want to sell it, shoot me an email at civilwararsenal@yahoo.com attn Eugene West

E.P. Bond Enfield Rifle Musket, JS/Anchor


At the outbreak of the War Between the States the Confederate Central Government contracted for the purchase of 30,000 Enfield Rifle Muskets to be delivered between October 1861 and April 1862. These Weapons had hand engraved inventory numbers put on the tang of the butt plates, 3 series were to be delivered each numbered 1 to 10,000, with the second series engraved with an A suffix and the third series an B suffix.

This is one of those historically significant Imports.

The Civil War Arsenal newest member is an E.P. Bond Enfield Rifle musket that has many of the distinguishing marks that collectors want to see with any Confederate Imported Weapon. The JS / Anchor is the stamp of John Southgate who was the Confederate States Chief Enfield Inspector, kind of like a quality inspector, hand engraved # 8199 on the tang of the brass butt plate, and B for Bond stamped on the comb of the stock which represents the maker/furnisher of the weapon.

Overall this E.P. Bond Enfield is a beauty, missing its rear adjustable sight is a bummer but it’s not that unusual since they were soldered on and either broke off or fell off due to the barrel heating up during rapid fire. It was missing the rear sling swivel which I replaced with original that I purchased from Lodgewood Mfg.

I purchased the socket bayonet made by J.R. Field from an EBAY auction. Its not a Salter made bayonet but I thought it was appropriate for the Bond Enfield since it was from a private contractor rather a British government contract.

Hope you enjoy the photos and if you have any questions about this weapon or any of the other Weapons in the Civil War Arsenal feel free to contact: Eugene West at civilwararsenal@yahoo.com

1863 Richmond Rifled Musket

Another fine example of an 1863 Richmond Long Rifle pieced together from a collection of Harpers Ferry captured parts, battlefield pick up parts and Richmond Armory parts. I purchased this Richmond from William Adams at the Gettysburg show in June of 2014. William is one of the leading experts in Civil War weapons, especially in Richmond Armory and Confederate Imports.

Like many of the Richmond’s for sale these days this one has some questionable characteristics that question its authenticity; however that’s the beauty with Richmond Armory weapons. The barrel on this weapon is not Harpers Ferry nor is it Southern made; I believe it’s a Springfield barrel with inspectors marks on it. The stock is split under the barrel band closest to the breach plug with the rear portion of the stock being either a Springfield or Whitney I’m not really sure. The end of the stock closest to the muzzle is from a Springfield rifle with the metal nose cap attached with a screw.

Some of the neat features of this weapon that any collector loves to see when it comes to Richmond rifles is the 1863 lock plate, which is in fine condition, the center barrel band has an offset U (for up) on both sides which suggests that it was hand stamped at the Richmond Armory unlike the Union counterparts that were machine stamped with almost perfect placement every time. And let’s not forget the stock that’s been pieced together under the barrel band.

If this weapon is authentic, (cause whom am I to say it is or isn’t since I’ve only owned it for a short while) it’s fair to say that is was assembled late 1863 when the Richmond Armory was struggling to supply weapons to the front lines because of a shortage of black maple to make stocks from as well as quality steel to produce barrels with.

Either way I love it, I didn’t pay as much for it as I have for others and it tells a story and yes we can debate the story but sometimes that’s half the fun.

I hope you enjoy the photos and if you have any questions about this weapon feel free to contact me.

P.S. I’m always looking to grow my collection, if you have any Richmond’s that you’d like to sell please contact: Eugene West at civilwararsenal@yahoo.com

1863 Richmond Va. Carbine & Linen Sling

Summers almost over which is a bummer but I’ve been busy buying lots of new Southern Weapons for my arsenal. I haven’t been written much lately since I’ve been so busy at work. It’s a necessary evil (work that is) if I want to continue collecting and growing my weapons collection.

Just some of my new pieces include 1863 Richmond long rifle that I purchased from William Adams at the Gettysburg Civil War show back in June, E.P. Bond Enfield with the JS & anchor cartouche and hand engraved inventory # 8199 on the butt plate and 1864 Richmond Virginia Carbine out of a collection from Georgia.

But the Weapon I’ll write about today is the 1863 Richmond Carbine, I purchased this weapon from the good people at Lodgewood Mfg. I believe the carbine was on consignment and while surfing their web site I stumbled upon it, immediately I called David and negotiated a price.

The carbine is in pretty good shape especially for the price I paid. The only replacement parts is the front barrel band and the ram rod, but you can tell the ram rod has been with the weapon for a very long time and is hand made with many forging flaws throughout, oh and its missing the rear sight which is not uncommon for Richmond carbines everything else on the weapon is correct.

The wood stock is complete and has a great aged/blackened color to it, the brass tip towards the muzzle is correct with the extra thickness on the bottom to hold the ram rod. The stock has the Maynard Primer cut out under the lock plate so we know this was made with one of the condemned rifle stocks confiscated when the Harpers Ferry Arsenal was raided back in April 1861.

All the metal on the carbine except for the lock plate has a sweetened chocolate color to it, I’m thinking that this was probably a wall hanger at one time and someone polished the lock plate to make it look pretty (bummer) but at least they didn’t polish the whole carbine. The front pinched sight has been filed down a bit and the butt plate is metal with no U.S. stamp on it.

This weapon has the rear sling swivel that screws into the stock behind the trigger guard generally lost on these carbines. A month or two after I purchased this carbine, Brian Akins from “Rebel Relics” had a confederate linen sling for sale on his web site, so here I go again I call Brian a negotiate a price for the sling.

I wasn’t certain which weapon I would place my new sling on but it seemed as though it was meant for this 1863 Richmond carbine.

So there you have it another story told and another weapon for the Civil War Arsenal. My collection of Richmond rifles is growing quickly, if you have a Richmond rifle, short rifle or carbine that you’d like to sell please contact me at civilwararsenal@yahoo.com Attn: Gene West

Thanks for stopping by and enjoy the photos.