Richmond Style Confederate Pike

In February of 1862, Georgia Governor Joseph Brown gave an address to mechanics throughout the state of Georgia.

Let every army have a large reserve, armed with a good pike, and a long heavy side knife, to be brought upon the field, with a shout for victory, when the contending forced are much exhausted, or when the time comes for the charge of bayonets. When the advancing columns come within reach of the balls, let them move in double quick time and rush with terrible impetuosity into the lines of the enemy. Hand to hand, the pike has vastly the advantage of the bayonet, and those having the bayonet, which is itself but a crooked pike, with shorter staff, must retreat before it. When the retreat commences, let the pursuit be rapid, and if the enemy throw down their guns and are likely to outrun us, if need be, throw down the pike and keep close at their heels with the knife, till each man has hewed down, at least, one of his adversaries.

Governor Brown gave this decree to all good people of Georgia but he was also broadcasting to other States of the Confederacy as well as other armies in the South.

So that brings me to my newest Confederate Pike, thought to be made in Richmond Virginia hence its name “Richmond Pike”. This pike is in very good condition with no cracks or missing parts. The blade has some pitting which just adds to its beauty.

Overall length is 98 ½”, with the spear point blade measuring 12 ½” long, and the iron collar at the base of the pike “ which is generally missing on most examples” measures 7”. The brass collar at the base of the blade measures 2” and is held in place a what appears to be a copper rivet.

The two metal straps that hold the blade in place run down the length of the pike beneath the brass collar and measure 17”. One strap is held in place with two copper rivets and 4 metal screws and the other strap is held in place with one copper rivet and 5 metal screws.

All in all this is a fine example of a Confederate Pike in great condition. If you have any questions about this weapon or any of the other weapons in my Arsenal feel free to contact me at civilwararsenal@yahoo.com attn, Gene West. Thanks for stopping by and enjoy the history.

C.S.A Arms Factory, Kenansville Enlisted Men’s Cavalry Sword

The newest addition to my collection is an 2nd Model Enlisted Men’s Cavalry Sword made at the C.S.A Arms Factory in Kenansville, North Carolina. The interesting thing about this Confederate sword is its copper scabbard, which happens to be in very good condition. Not really certain if this scabbard is original to the sword, however it fits the scabbard well and just looks really cool.

Most Kenansville Cavalry Swords are marked with Roman numerals on the edge of the knucklebow (this example is marked with RN # XXVIIII or 29) and most scabbards are marked with a Matching RN # on the top of the throat (this example is not) leaving one to believe that this scabbard is not original to the sword. I’m also told by the experts that this scabbard is an earlier version, considered to be the 1st Model scabbard. So maybe, just maybe they made the sword at the factory and they had a 1st Model scabbard lying around which just happen to fit the sword……don’t really know, because I wasn’t there…..one things for sure it’s a really neat sword and scabbard.

The blade on this sword has some pitting and is very dark but is not damaged in any way and the brass guard has great color, color that takes 150 plus years to create. The grip has been rewrapped at one time or another, which is a bummer but there’s worse things in life.

The Scabbard is just about as pretty as it gets (my opinion) when it comes to Confederate Scabbards. The 150 year old copper color is just over the top and its crude soldering on the back just reeks of the Confederacy, and I say that in a loving way…..you can see traces of red paint throughout suggesting that it was originally painted. This is not unusual for Confederate Scabbards to be painted either red or black.

If you have any questions about this sword and scabbard or any of the other weapons in my arsenal feel free to ask, if you have any Confederate Weapons you’d like to sell let me know maybe we can work out a deal. Contact me at civilwararsenal@yahoo.com attn Gene West….thanks for stopping by the Civil War Arsenal.

Confederate Cloverleaf Flagstaff

Over the past year or so my collection of Confederate Pikes has grown expediently in relation to the rest of my collection. Like the other categories of weapons I collect (e.i. guns,, knives, swords etc…) my end goal to to have at least one of every example that exist. Whether or not I will have the resources or the access to all the neat pieces is another story.

The Flagstaff you see here is one I purchased a few months ago from Brian Akins of www.rebelrelics.com. I had purchased a few Confederate Pikes prior to this accusation from Brian and knowing that I had an interest in pikes/poles he asked if I’d be interested in the featured Flagstaff. After reviewing the photos and haggling a bit over price we negotiated and I became the owner of the historic gem.

Until recently these poles were thought to be pikes by collectors and dealers alike. But the collecting community generally agrees these are not at all pikes but Flagstaffs. The book “Collecting The Confederacy” by Shannon Pritchard who happens to be one of the leading experts in everything about the American Civil War, especially Confederate. Mr. Pritchard makes a valid case why these poles should be recategorized as Flagstaffs and not Pikes.

Only a handful of these Cloverleaf Flagstaffs are know to exist so much of there history is sketchy at best. Here are a few of the reason Mr. Pritchard suggest these be reclassified.

1. Some of the ones that do exist are painted with gold on the cloverleaf and red on there hickory wood poles. There would have been no reason to paint these poles if they were pikes.

2. Many of existing examples are stamped with makers marks, and all have tapered shafts these would have been unnecessary expenses.

3. Pikes would generally be jammed into the ground by the pikeman giving them leverage against charging horses/Calvary-men, but as you can see in the photos the Flagstaff has a baseball bat type butt which would be suitable for resting on the outer thigh or on the ground.

4. The area where the Cloverleaf meets the wood shaft is weak point. It is only 11/16” in diameter and would have surely broken if used against charging Calvarymen. All other known pikes have larger diameter shafts with the exception of the retractable pike.

5. It’s also thought that the Cloverleaf design wasn’t practicable as a pike however was attractive as an ornament atop a flagstaff.

6. Mr Pritchard write that he has seen an example that was excavated near the Burnside Bridge where Toomb’s Georgians were overrun in Sharpsburg Maryland. He suggest that they wouldn’t have been carrying pikes, but flags, when they were overrun.

So now that we’ve cleared up all the reasons why this is not a pike and is indeed a Flagstaff we can move on to the featured Confederate Cloverleaf Flagstaff.
The overall length from top to bottom is 84”, the metal straps on either side of the pole holding the Cloverleaf in place is 16.5” long and has 4 rivets holding all in place. The Cloverleaf measures 10.5” tall X 7.5” wide.

At one time or another the pole and cloverleaf were shellacked, however it was done a very long time ago. This is not unusual for items such as this since many were displayed in SCV OR GAR halls. There does seem to be a gold hue in the metal of the cloverleaf under the shellac suggesting that at one time it was painted gold that may have worn off or was removed prior to shellacking.

The two know makers of Flagstaff for the Confederacy were H. Stevens and Sam Griswold. It’s my opinion that this Flagstaff was made by H. Stevens of Georgia, however there’s no makers mark and it is speculation on my part.

There is a few small nails in the wood shaft of the flagstaff suggesting to me that this is were the flags or company pennants that it carried were fastened.

So there you have it another piece of Southern history brought to you by the Civil War Arsenal. If you have any questions about this item or any other items in the Civil War Arsenal feel free to contact me at civilwararsenal@yahoo.com attention Gene West. Thanks for stopping by.

Confederate Bridle Cutter Pike, Louis Froelich

During the war on Northern aggression the C.S.A Arms Factory in Wilmington North Carolina had contracts to manufacture two types of lances. The first was a straight steel blade, 18” long X 2” at its widest point. Secured to the hickory shaft with a 1” iron pin that was flattened at both ends. The hickory shaft measured approximately 7’ – 9” long with an iron collar at the bottom end of the shaft that was held in place with an iron pin.

The second type of lance was similar to the first with the addition of a sickle shaped bridle cutter. The sickle and the blade are actually two different pieces held in place with the 6 ¾” iron collar. This primitive type of weapon would have been used against Calvary troops charging artillery batteries.

If the user could hook the sickle portion of the blade around the leather bridle portion of the charging Calvary Horsemen they would cut the bridle leaving the rider of the horse with no control and vulnerable to attack from foot soldiers. I’m not certain of any documented use of these weapons but it doesn’t mean they weren’t used in rare instances. By the time of the American Civl War, most of these types of Napoleonic weapons were obsolete…..remember Calvary-men had breach loading carbines such as Sharps and Spencer’s that could shoot up to 7 shots before reloading.

Exactly how many lances and bridle cutters were made by Louis Froelich and Company is not known, but extant examples are extremely rare. An article in the “Home Industry” April 28th, 1864 edition of the Wilmington Journal reported that Froelich manufactured 3,700 lance spears during the war. It’s not clear how many of the 3,700 were bridle cutters but it’s the authors opinion that it’s few at best. As of this blog post there are only 7 Louis Froelich bridle cutters know to exist.

Which brings us to the newest weapon in the Civil War Arsenal. Over the past year or so I’ve been on a mission to grow my collection of Confederate poles of all types….Pikes, Lances, Bridle Cutters and Flagstaffs. They make great conversation pieces and display nicely in my War Room/Arsenal. Most collectors like the guns and edged weapons (I do too) but don’t normally collect pole type weapons. Probably because there hard to display, due to there size and even though they were made during the war not many were used during in battle……and many collectors want weapons that have provenance, not pieces that sat in arsenals waiting to be used.

This Bridle Cutter is in great condition, it’s hickory shaft has no cracks and the iron has a nice darkened patina to it. It even has its iron collar at its base which is usually missing on other pikes and lances. Just another great piece of American history with North Carolina provenance, you gotta love the South.

I’d like to thank John W. McAden, Jr. and Chris E. Fonvielle, Jr., there book “Louis Froelich Arms-Maker to the Confederacy”. Without collectors and enthusiasts like them we would know little about the history of pieces like this.

If you have any questions about this Bridle Cutter or any of the other pieces in the Civil War Arsenal feel free to contact me at civilwararsenal@yahoo.com attn: Gene West

Kenansville D-Guard Artillery Short Sword

The following Confederate Short Sword is attributed to Louis Froelich of Wilmington North Carolina. Mr. Froelich born 1817 in Bavaria (Germany), he and his family soon traveled to Liverpool England where he worked as a mechanic/machinist. June of 1860 he and his family leave Liverpool for New York. By the spring of 1861 he and his family are living in Wilmington North Carolina.

At the start of the War Of Northern Aggression, Wilmington was North Carolina’s busiest seaport and largest city with a thriving German community and probably the reason Froelich chooses it for his home. He takes a job working at the Wilmington Button Manufactory where he is soon promoted as “Director” but the factory closes in the summer of 1861.

Not one to sit idle the highly skilled Froelich recognizes the need for arms and equipment the new Southern Government would need. He soon starts manufacturing quality edged weapons, such as Bowie Knifes, Swords, Pikes, and D-Handles. In September 1861 he partners with a Hungarian immigrant named Bela Estvan and they name there weapons manufacturing firm “Wilmington Sword Factory”. Although the circumstances surrounding their business connection remain unclear, Froelich apparently planned to produce the weapons while Estvan would handle sales and distribution.

Soon after opening the Wilmington Sword Factory they change the name to C.S.A. Arms Factory. The change perhaps reflects the owners concern that potential customers might mistakenly believe the Wilmington Sword Factory was limited to the manufacture of only swords. The change also reflected there devotion to the Confederate States of America. There loyalty apparently impressed the government in Richmond and led to a lucrative arms contract.

During the morning hours of February 1863 the Confederate States Armory catches fire and destroys the industrial complex. Shortly after he dissolves his partnership with Bela Estvan and relocates his armory in Kenansville, North Carolina.

In July 1863 the Union Army storms the town and burns the factory. Not one for giving up so quickly Froelich rebuilds and by November 1863 is producing edged weapons, knapsacks and accoutrements. He is financially troubled at this point due to relocation and fires but he continues to do whatever he can for the Southern Government.

After the war Froelich and his family become farmers, planting orchards of apples trees, pear trees, peach trees, plum, apricot and fig trees. Records show that the family had profits of $2663.25 from their agricultural pursuits in 1870. He must have been as good as a farmer as he was a businessman. Louis Froelich dies of consumption (tuberculosis) in Halifax County N.C. October 27,1873 at the age of 56.

Louis Froelich’s legacy as an arms maker to the Confederacy survives today. The Bavarian craftsman immigrated to America seeking a new life, only to find himself situated in the South as war breaks out. He took advantage of the opportunity to provide for his growing family by manufacturing the much needed weapons and equipment for North Carolina and Confederate Troops.

His skills as an industrial craftsman are evident in examples of his now scarce swords, sabers, bayonets, pikes and Bowie Knives. They were all of high quality and were widely used by the Army of Northern Virginia. For the duration of the war North Carolina armed and supplied its 125,000 troops more effectively than any other Southern State, in large part because of the efforts of independent industrialists like Louis Froelich.

So is everybody still with me? I’m hoping that you haven’t zoned out by now,lol…..

I have the pleasure of introducing the newest member of the Civil War Arsenal, which is a Artillery Short Sword sometimes referred to as a Kenansville D-Handle or D-Guard. It’s overall length is 21” long, the blade measures 15 ¾”. The spear point blade is about ¼” thick towards the center of the oval shaped cross section. The grip handle is made of walnut and the guards are of steel stock. The grip is basically round in shape except for a flattened area on either side running up about 3 ¼” up from the guard.

Scabbards are extremely rare especially ones with the leather throat belt loop still in tact. The example that we see here is far from complete but it is a survivor with probably about 65% of it intact. The leather they used for these knifes was usually poor quality which became brittle and cracked easy. The design flaw to this scabbard was the leather belt loop would rub against the D-Handle guard. Over time this would tear though the leather loop dropping it from the belt it was attached too hindering it useless.

So that just about does it for now, I hope you enjoy the photos and if you have any questions about this Knife or any of the other weapons in the Civil War Arsenal feel free to contact me.
Attn: Gene West civilwararsenal@yahoo.com

CS Star, Confederate Artillery Short Sword

Even though considered scarce this type Short Sword is one of the more common Confederate edged weapons.

These Short Sword are often reproduced so the buyer needs to beware, however there are many ways of identifying an authentic sword versus a reproduction. If you look closely at the handle you will clearly see the casting flaws. The star at the top of the pommel rarely has the five points you would normally see if it were perfect and even if one side did the other side wouldn’t. The CS on the guard at the base of the handle are barely readable. The handle is hollow and many have holes in them, some were even filled with lead. You’ll also see where the mechanics filed the rough edges.

The brass handles have a high copper content that’s often very noticeable. The blades are crude but cleaner in appearance then the handles, but all still have there flaws. There is a single nonstop fuller that’s about 13” long which is never straight. Believed by many to have been manufactured in Selma Alabama or Macon Georgia.

So that brings me to the next example in the Civil War Arsenal. The overall length of this Short Sword is 24 ½” long with a handle of 5 ½” and blade 19”. It weighs 2 ¾ lbs which would make it cumbersome to carry, especially on a long march with all the gear a foot soldier would have to carry.

Typical of many Confederate weapons you will never find two alike, but I believe that’s the beauty in them. Thanks for stopping by and if you have any questions about this Short Sword or any of the other weapons in the Civil War Arsenal email me at civilwararsenal@yahoo.com attn: Gene West

Clip Point D Guard Bowie Knife

Here’s a Confederate D Handle knife that’s been in my collection for quiet some time. It doesn’t get as much respect as some of the other D-handle knives due to its size, but it would have been the perfect knife for a foot soldier to carry since it was small and lighter in weight then most of the heavy and clumsy D-Handles.
The overall size of the knife is 15 ½” long, with the handle measuring 5” and the blade measuring 10 ½”. This Clip point Knife has a 2 ¾” false edge and the blade is 1 ½” wide. The Blacksmith kept the natural sweep of the blade which occurs when the edge is forged.
It’s my guess this knife was made from an old file, even though there are no teeth marks on the blade. It’s pretty simplistic in nature but still very well made. The Guard is thick at the pommel where it’s fastened to the handle (about 1/8”) but the area of the quillon where the blade meets the handle is very thin, measuring about 1/16” or thinner. Proof that the D-Handle was crafted with a hammer by a blacksmith or mechanic.
The blade and the guard both have a nice blackened patina to them however the ferrule at the base of the handle appears to be pewter, which may be the neatest feature of the knife. The scabbard is long gone to time but it’s my opinion it would have been leather or pigs hide.
Well there you have it another Confederate D-Handle Bowie Knife. If you have any questions about this knife or any of the other weapons in the Civil War Arsenal feel free to email me at civilwararsenal@yahoo.com attn: Gene West

Confederate Retractable Pikes

For the longest time I’ve been wanting and waiting for a Retractable Pike to become available that had all the characteristics that I demand for my collection. I’ve seen a few over the past years that drew my interest and curiosity but it wasn’t until I examined them that I realized they didn’t meet my expectations. So year after year, show after show it’s been one of those Southern Weapons that I’ve been on the hunt for but never could find that ONE that I could call mine.

As luck would have it I was on one of the more prominent Civil War Dealers web sites and low and behold their it was in all its glory, the retractable pike that said “I’m yours, buy me”. Interestingly enough there wasn’t just one pike to choose from there we’re two. One had a lighter wood finish, that may have been cleaned at some time and it had a shorter blade by about 2 inches. Then their was the pike that called to me.

This pike has a beautiful blackened wood and metal finish. Unlike so many of the pikes that I’ve handled over the years that always seemed to be missing a part or two or had cracks in the wood or a damaged blade, this pike was just stunning it wasn’t missing anything. It had all its hardware and a longer blade then most, which really drew my curiosity.

The pike has a spear point blade that’s extremely sharp. The shaft is six foot 1 inch long when the blade is in the closed position, the blade is 16 inches long and the pike has an overall length of 7 foot 5 inches when the blade is in the opened position.

The retractable pike was invented by Reverend Doctor Graves, a Methodist minister originally from Vermont, living in Georgia at the time of the war. Probably made in Macon Georgia these pikes were originally designed to have a spring that would eject the blade (kinda like a large stiletto or switchblade) to the open position however the South didn’t have the capabilities of making such a spring so they were made without them. The user would slide the bolt on the side to manually move the blade to open and closed position.

Georgia Governor Joseph Brown gave an address in February, 1862 appealing to the blacksmiths and mechanics throughout the state to show there patriotism and turn out ten thousand pikes to be six feet long and have an eighteen inch blade.

Suggesting that armies should be armed with pikes and a long heavy side knives and when advancing columns come within reach of the balls, let them move in double time and rush with terrible impetuosity into the lines of the enemy.

Governor Brown stated in his address that long range guns sometimes fail to fire and waste hundreds of balls to one that takes effect, but the short range pike and terrible knife when brought within their proper range, and wielded by a stalwarts patriots arm never fail to fire and never waste a single load.

There’s no doubt Gov. Browns intentions were good but I’m not fighting anyone who has a gun that shots lead with an accuracy of 500 yards if I’m only armed with a 6 foot pike. I Believe a Georgia Regiment almost committed mutiny when told they would have to fight with such a weapon. Can’t say I blame them.

So there you have it, yet another fine example of a Southern Edged Weapon. I hope you enjoy the photos if you have any questions about this weapon or any of the other weapons here at the Civil War Arsenal I can be reached at civilwararsenal@yahoo.com attn: Eugene West

Confederate, Joseph Brown Georgia Pike

The outbreak of the war left the the Southern states without much of the resources there Northern counterparts had. Rifles, pistols, swords, uniforms and least we forget people were just some of the needs lacking to fight a war. Because of this the ingenuity of the Southern war machine, i.e. politicians, blacksmiths, mechanics and farmers would have to think outside the box.

In February of 1862, Georgia Governor Joseph Brown gave an address to mechanics throughout the state.

Executive Department,
Milledgeville, Georgia,
February 20th, 1862.

To the Mechanics of Georgia:

The late reverses which have attended our arms, show the absolute necessity of renewed energy and determination on our part. We are left to choose between freedom at the end of a desperate and heroic struggle and submission to tyranny, followed by the most abject and degraded slavery to which a patriotic and generous people were ever exposed. Surely we can not hesitate. Independence or death should be the watchword and reply of every freeborn son of the South. Our enemies have vastly superior numbers and greatly the advantage in the quantity and quality of their arms. Including those, however, which have and will be imported, in spite of the blockade, we have guns enough in the Confederacy to arm a very large force, but not enough for all the troops which have been and must be called to the field. What shall be done in this emergency? I answer: Use the “Georgia Pike” with six feet staff, and the side knife eighteen inches blade, weighing about three pounds.

Let every army have a large reserve, armed with a good pike, and a long heavy side knife, to be brought upon the field, with a shout for victory, when the contending forced are much exhausted, or when the time comes for the charge of bayonets. When the advancing columns come within reach of the balls, let them move in double quick time and rush with terrible impetuosity into the lines of the enemy. Hand to hand, the pike has vastly the advantage of the bayonet, and those having the bayonet, which is itself but a crooked pike, with shorter staff, must retreat before it. When the retreat commences, let the pursuit be rapid, and if the enemy throw down their guns and are likely to outrun us, if need be, throw down the pike and keep close at their heels with the knife, till each man has hewed down, at least, one of his adversaries.

Had five thousand reserves thus armed and well trained to the use of these terrible weapons been brought to the charge at the proper time, who can say that the victory would not have been ours at Fort Donaldson?

But it was probably important that I state here the use to be made of that which I wish you to manufacture. I have already a considerable number of these pikes and knives, but I desire, within the next month, ten thousand more of each. I must have them; and I appeal to you, as one of the most patriotic classes of our fellow citizens, to make them for me immediately. I trust every mechanic, who has the means of turning them out rapidly, and the owner of every machine shop in this State, will at once lay aside, as far as possible, all other business and appropriate a month or two to the relief of the country in this emergency. Each workman who has the means of turning them out in large numbers without delay will be supplied with a proper pattern by application at the Ordinance Office at Milledgeville.

Appealing to your patriotism as a class and to your interest as citizens, whose all is at stake in the great contest in which we are engaged, I ask an immediate response.

In ancient times, that nation, it is said, usually extended its conquests furthest whose arms were shortest. Long range guns sometimes fail to fire and waste an hundred balls to one that takes effect; but the short range pike and the terrible knife, when brought within their proper range, ( as they can be almost in a moment) and wielded by a stalwart patriot’s arm, never fail to fire and never waste a single load.

I am, very respectfully, your fellow citizen,

After reading such a decree you can better understand the sentiment and feelings of the Southerner at the time of the war. The institutions have dumbed down the facts since the War of Northern Aggression with political correctness. But it’s obvious that the Southerner was defending his freedoms, they were fighting the second revolution the same fight there Grandfathers had fought some 80 years earlier against the British.

Calling for mechanics throughout the state to make six foot staffs with eighteen inch blades shows just how desperate the Southern war machine was. Still thinking in terms of a Napoleonic type war, where armies lined up in open fields with smooth bore rifles and blades of all types believing a Divine Spirit was on there side and would protect them the sorrows of death.

There Northern counterparts were manufacturing state of the art breech loading repeating carbines and rifles, rifled cannons that could launch explosive projectiles accurately for miles, building the largest wartime Navy the world had ever seen.

Seems hard to believe that these two countries/armies could have been fighting against each other with such a difference in the types of weapons they hoped would bring them victory. It’s a credit to the South that the war lasted as long as it did, just goes to show how difficult it is to strip someone of there freedom without them fighting back like a caged rabbit dog, after all they were willing to use pikes against men with guns, sounds crazy too me.

Which brings me to the next weapon in the Civil War Arsenal. This Joseph Brown Georgia Pike has a spear point blade that measures 12 ¼” long, the overall length of the pike is 8’ & ¼” from the butt to the point of the blade. It has no cracks in the wood shaft and no makers marks, which is not uncommon for these pikes. The brass butt collar at the base of the shaft is still in place, which is generally lost on most examples. The wood shaft has what appears to be the markings ( indentations ) of rope that was once wrapped around it. I’ve seen this before on other pikes and it’s my opinion that the shaft was wrapped with rope to better grasp for lungeing forward. However I’ve never seen a pike with the rope still in place. This pike was purchased from Sam, at the Horse Soldiers store in Gettysburg Pa. I’m guessing due to its great condition it was a war souvenir shipped north after the war and displayed at a G.A.R hall, just an educated guess.

So there you have it another fine example of a Southern Edged Weapon in the ever growing Civil War Arsenal, a Confederate Georgia Pike. If you have any questions about this weapon feel free to contact me. And if you have a civil war weapon that you’d like know more about or perhaps you’d like to sell feel free to contact me at civilwararsenal@yahoo.com , attn: Eugene West. Thanks for stopping by.

Confederate, Tennessee Side Knife and Rig

This is a great example of a Side knife that a Confederate Infantrymen would have carried throughout the War Between the States. Small and light enough to be worn day and night. Many of the large D Handle knives were way too big, clumsy and heavy to be totted around day in and day out, many were tossed to the side of the road in favor of a lighter and more useful knife, such as this.

This knife is extra neat since it still has its wood lined scabbard and belt rig. Both of these pieces are hand sewed which was common for most Confederate rigging. The Spear Point blade is single edged with a sharpened 2 3/4″ top edge. The overall length of the knife is 14 ¾”, with the blade measuring 10 ¼ “and width 1 3/8”.

This knife was formally in the collection of Lee Hadaway, who is one of the leading experts in Confederate Edged Weapons and author of the “Confederate Bowie Knife Guide” which this Knife and Rig is published in. This knife is also published in “Confederate Bowie Knives” on page 253 as a Tennessee Side Knife.

I hope you enjoy the photos and if you have any questions about this knife please feel free to contact me at genx1969@yahoo.com attn. Gene West